关键字
协会热线:029-84276641
            首页微电机期刊
 
  综述
  伺服与控制
  设计与研究
  专题讲座
  检测技术
  工艺技术
  经验交流
  实用技术
  读者园地
  技术交流
  使用与维护
  标准评述
  工艺与装备
  驱动与控制
  应用研究
  测试研究
  精品连载
 
标题:超声电机定子的简化复合梁模型裂纹扩展分析与实验
作者:张顺峰,周盛强,赵淳生,等
2011年第8期 访问次数:230次

摘 要:超声电机工作环境非常复杂,压电陶瓷极易发生断裂失效。为了分析研究电场、预压力及裂纹位置对压电陶瓷断裂失效的影响,将超声电机的定子沿周向简化为弹性复合梁模型,并在压电陶瓷上预制贯穿裂纹。首先用Ansys有限元软件对简化模型进行仿真,分析得到增大电场、预压力能增加裂纹尖端应力值,裂纹更加容易扩展。然后通过实验验证得到增大电场强度裂纹更加容易扩展。
关键词:弹性复合梁;裂纹扩展;仿真;实验

Abstract: The working environment of ultrasonic motor is very complex, and the piezoelectric ceramic is vulnerable to be failure. In order to analyze the influence of the fracture failure to the piezoelectric ceramics coming from the electric field, pressure, and crack positions, the stator of ultrasonic motor will be simplified to an elastic beam model around the direction. A prefab crack will be made throughout the piezoelectric ceramics. First, a simulation analysis was done for the simplified model by the Ansys software, and the results demonstrated that the stress value increased with the electric field and the pressure rose up. Then the experiment validated it.
Key words: elastic composite beam;crack propagation;simulation;experiment

 
 
 
    广告服务 |   商务合作 |   使用帮助 |   网站地图 |     主办:中国电器工业协会微电机分会      挂靠:西安微电机研究所有限公司      地址:西安市高新区上林苑四路36号(710117)
   copyright © www.china-micromotor.com.cn all rights reserved.     版权所有:微电机网     陕ICP备05005551号-2
 

西安微电机研究所有限公司公众平台
二维码

《微电机》杂志公众平台二维码