关键字
协会热线:029-84276641
            首页微电机期刊
 
  综述
  伺服与控制
  设计与研究
  专题讲座
  检测技术
  工艺技术
  经验交流
  实用技术
  读者园地
  技术交流
  使用与维护
  标准评述
  工艺与装备
  驱动与控制
  应用研究
  测试研究
  精品连载
 
标题:综合考虑起动转矩与牵入转矩时转子电阻优化设计
作者:张炳义,何功飞,冯桂宏
2017年第8期 访问次数:233次

摘要:针对油田等电机常处于轻载运行的场合,为了实现较低功率等级自起动永磁电机替换原异步电机的目的,需要合理匹配自起动永磁电机的起动转矩和牵入转矩提高其带载起动能力,而转子电阻的改变会影响电机起动转矩与牵入转矩的比例,进而影响电机的带载起动能力。本文从理论上对电机的起动转矩和牵入转矩进行了分析,分析转子电阻对两者的影响,以笼型转子的电导率为变量,起动时间为衡量标准,利用有限元仿真求得恒转矩负载时转子电阻与电机带载起动能力的关系,总结出转子电阻对电机带载起动能力的影响规律,为电机转子电阻的设计提供了依据。
关键词:自起动永磁电动机;转子电阻;有限元仿真;起动性能

Abstract: For the occasions of where motors often in light load such as oil fields,in order to realize the purpose of replacing original induction motor with the low power rating linestart PMSM, the starting torque and pullin torque of linestart PMSM should be reasonably matched to promote motors capacity of starting with load, the change of rotor resistance will affect the ratio of motors starting torque and pullin torque, thereby affecting motors capacity of starting with load. In this paper, the starting torque and pullin torque of the motor were analyzed in theory, and the influence of rotor resistance on starting torque and pullin torque was also analyzed, taking the electrical conductivity of the cage rotor as variable, the starting time and maximum ability of starting with load for measurestandard,obtaining the relationship between rotor resistance and motors ability of starting of constant torque load using finite element simulation.The influence of rotor resistance on motors ability of starting with load was summarized, which provided a basis for the design of motors rotor resistance.
Key words: linestart PMSM; rotor resistance; finite element simulation; starting performance

 

 

 

 

 

 
 
 
    广告服务 |   商务合作 |   使用帮助 |   网站地图 |     主办:中国电器工业协会微电机分会      挂靠:西安微电机研究所有限公司      地址:西安市高新区上林苑四路36号(710117)
   copyright © www.china-micromotor.com.cn all rights reserved.     版权所有:微电机网     陕ICP备05005551号-2
 

西安微电机研究所有限公司公众平台
二维码

《微电机》杂志公众平台二维码