关键字
协会热线:029-84276641
            首页微电机期刊
 
  综述
  伺服与控制
  设计与研究
  专题讲座
  检测技术
  工艺技术
  经验交流
  实用技术
  读者园地
  技术交流
  使用与维护
  标准评述
  工艺与装备
  驱动与控制
  应用研究
  测试研究
  精品连载
 
标题:无刷直流电机的智能控制研究
作者:文 卫
2011年第6期 访问次数:226次

摘  要:无刷直流电机具有交流电机结构简单,运行可靠,维护方便等优点,又具有直流电机那样良好的调速性能而无机械换向器等优势,得到广泛应用。针对大多数无刷直流电机位置伺服系统采用的是PID控制方式,此控制方式存在系统参数发生变化或带有非线性负载时,其稳态输出特性变差,难以获得满意的控制效果的情况,本文在分析无刷直流电机的模型后,提出一种能根据跟踪误差大小,利用模式切换开关自动切换到PID控制或滑模变结构控制的智能控制方法,从而实现无刷直流电机转子转速的快响应、低超调和高精度控制。
关键词:直流电机;PID控制;模型;智能控制

Abstract: The brushless DC motor has some AC motor advantages in the simple structure, reliable operation and convenient maintenance, and also has the DC motor advantages that good performance of speed and no mechanical commutation, so it is widely used. For most of the brushless DC motor position servo system uses a PID control mode. With this control mode the steady-state output characteristics would become poor when system parameter changes or with nonlinear load, and it is difficult to obtain satisfactory control effect. After analyzed the model of brushless DC motor, this article presented an intelligent control method that can utilize mode switch automatically switch to PID control or sliding mode variable structure control according to the tracking error size, so as to realize the brushless DC motor rotor speed quick response, low overshoot and high precision control.
Key words: DC motor; PID control; model; intelligent control

 
 
 
    广告服务 |   商务合作 |   使用帮助 |   网站地图 |     主办:中国电器工业协会微电机分会      挂靠:西安微电机研究所有限公司      地址:西安市高新区上林苑四路36号(710117)
   copyright © www.china-micromotor.com.cn all rights reserved.     版权所有:微电机网     陕ICP备05005551号-2
 

西安微电机研究所有限公司公众平台
二维码

《微电机》杂志公众平台二维码