关键字
协会热线:029-84276641
            首页微电机期刊
 
  综述
  伺服与控制
  设计与研究
  专题讲座
  检测技术
  工艺技术
  经验交流
  实用技术
  读者园地
  技术交流
  使用与维护
  标准评述
  工艺与装备
  驱动与控制
  应用研究
  测试研究
  精品连载
 
标题:多余度电机伺服系统可靠性研究
作者:张修文,王磊,冯同,等
2017年第8期 访问次数:248次

摘要:为了提升电机伺服系统的可靠性,本文从系统的可靠性设计出发,以提升系统容错性能为方向,采用冗余技术,对控制器硬件系统拓扑结构进行重新设计。增加了驱动环节和电机绕组的冗余度,设计了多余度电机伺服系统。之后参考国军标GJB/Z 299C-2006,基于数理统计可靠性预计法对系统进行可靠性定量计算,对传统电机伺服系统和多余度电机伺服系统的可靠性进行比较。从理论上证明了多余度电机伺服系统对于提升系统可靠性的意义。
关键词:容错设计;多余度;可靠性预计;伺服系统
Abstract: In order to improve the reliability of the motor servo system, this article embarked from the system reliability design, taking improve systems fault tolerance as the direction, using redundant technology, to redesign topological structure of the controller hardware system. Increasing redundancy of driving links and the motor winding, redundancy motor servo system was designed. After refer to military specifications GJB/Z 299C2006, based on the reliability prediction method of mathematical statistics on the system reliability quantitative calculation, to compare the reliability of the traditional motor servo system and the redundancy of the servo system. Theoretically proved the meaning of that the redundancy motor servo system to improve system reliability.
Key words: fault tolerant design;redundancy;reliability prediction;servo system
 
 
 
    广告服务 |   商务合作 |   使用帮助 |   网站地图 |     主办:中国电器工业协会微电机分会      挂靠:西安微电机研究所有限公司      地址:西安市高新区上林苑四路36号(710117)
   copyright © www.china-micromotor.com.cn all rights reserved.     版权所有:微电机网     陕ICP备05005551号-2
 

西安微电机研究所有限公司公众平台
二维码

《微电机》杂志公众平台二维码