关键字
协会热线:029-84276641
            首页微电机期刊
 
  综述
  伺服与控制
  设计与研究
  专题讲座
  检测技术
  工艺技术
  经验交流
  实用技术
  读者园地
  技术交流
  使用与维护
  标准评述
  工艺与装备
  驱动与控制
  应用研究
  测试研究
  精品连载
 
标题:基于线电压差值对称的无刷直流电机换相信号相位补偿
作者:姜志超,廖 勇
2011年第8期 访问次数:235次

摘  要:无刷直流电机控制系统实现最佳换相可以使无刷直流电机发挥出最佳的性能。文章以无刷直流电机工作在三相星型六个状态模式为基础,详细分析了最佳换相、超前换相和滞后换相情况下线电压差值与霍尔换相信号相位之间的关系,据此提出一种补偿换相信号偏差的新型闭环控制方法。该补偿方法以两相线电压差作为信号量,前后两次换相时刻采集的非对称信号量偏差值作为反馈量,通过PI调节器达到补偿霍尔换相信号相位偏差的目的。仿真和实验证明该方法能够实时、有效地补偿换相信号的相位偏差。
关键词:相位偏差;无刷直流电机;相位补偿;闭环控制

Abstract: When the precise commutation of brushless DC motor automatic control system was realized, the brushless DC motor could be running in the best performance. In this paper, the precise commutation, leading commutation and delaying commutation of brushless DC motor with three-phase Y-connected windings was discussed. The relationship between line voltage difference and hall communication signal was analyzed and a new closed-loop compensation control method was presented. The compensation method used the difference of two line voltage as a semaphore and the asymmetric semaphore of line voltage bias as feedback signal. By this way the phase position deviation of hall commutation signal was corrected through the PI adjuster. The simulation and experimental results verify the effective of the proposed method.
Key words: phase discrepancy;brushless DC motor;compensation of phase;closed-loop control

 
 
 
    广告服务 |   商务合作 |   使用帮助 |   网站地图 |     主办:中国电器工业协会微电机分会      挂靠:西安微电机研究所有限公司      地址:西安市高新区上林苑四路36号(710117)
   copyright © www.china-micromotor.com.cn all rights reserved.     版权所有:微电机网     陕ICP备05005551号-2
 

西安微电机研究所有限公司公众平台
二维码

《微电机》杂志公众平台二维码