关键字
协会热线:029-84276641
            首页微电机期刊
 
  综述
  伺服与控制
  设计与研究
  专题讲座
  检测技术
  工艺技术
  经验交流
  实用技术
  读者园地
  技术交流
  使用与维护
  标准评述
  工艺与装备
  驱动与控制
  应用研究
  测试研究
  精品连载
 
标题:基于快速原型的开关磁阻电机控制系统开发
作者:李军伟,葛金龙,邱今胜
2015年第8期 访问次数:218次

摘要:采用dSPACE开发平台对纯电动汽车驱动用5kW三相12/8极开关磁阻电机(SRM)控制系统进行快速控制原型设计与开发。依据开通角和关断角随电机转速变化而改变的原理,在Simulink环境下建立了SRM控制系统实时仿真模型,在ContorlDesk环境下在线调整控制参数,优化控制策略和控制参数以获得良好的控制效果。以快速控制原型开发中的控制策略和控制参数为基础对SRM控制系统进行开发,试验结果表明在满足控制性能的前提下,该方法可缩短控制系统的开发周期,节约开发成本。
关键词:电动汽车;开关磁阻电机;快速控制原型

Abstract: Rapid control prototyping for a 5 Kw, threephase 12/8 switched reluctance motor (SRM) control system was developed, which was used for pure electric vehicle driving system, by using DSPACE development platform. Based on the principle of turnon angle and turnoff angle changing with the motor speed, a realtime simulation model of SRM control system was established in the Simulink, the control parameters of the controller was adjusted in ContorlDesk to optimize the control strategy and obtain a good control result. Based on the development of the rapid control prototyping, SRM control system was developed. The experiment results show that the development cycle of controller can be shortened and the cost can be saved by this method under satisfying the control performance.
Key words: electric vehicle; switched reluctance motor; rapid control prototyping

 
 
 
    广告服务 |   商务合作 |   使用帮助 |   网站地图 |     主办:中国电器工业协会微电机分会      挂靠:西安微电机研究所有限公司      地址:西安市高新区上林苑四路36号(710117)
   copyright © www.china-micromotor.com.cn all rights reserved.     版权所有:微电机网     陕ICP备05005551号-2
 

西安微电机研究所有限公司公众平台
二维码

《微电机》杂志公众平台二维码