关键字
协会热线:029-84276641
            首页微电机期刊
 
  综述
  伺服与控制
  设计与研究
  专题讲座
  检测技术
  工艺技术
  经验交流
  实用技术
  读者园地
  技术交流
  使用与维护
  标准评述
  工艺与装备
  驱动与控制
  应用研究
  测试研究
  精品连载
 
标题:基于圆感应同步器的高精度机电编码器设计
作者:黄新吉
2018年第4期 访问次数:245次

摘要:机电编码器作为检测传感器类的一种,广泛应用于各行各业的控制系统中。本文提出一种基于圆感应同步器的机电编码器,采用机电一体化设计,外壳直径为83mm,分辨率达到20位,转换精度10″,并通过RS485总线与外界进行通讯。该编码器具有体积小、可靠性和稳定性高的特点,可以在极其恶劣条件下长期工作,适用于工业控制系统和军事领域应用。
关键词:圆感应同步器;机电编码器;机电一体化设计
Abstract: As a detection sensor types, mechanical and electrical encoder in the control system is widely applied in all walks of life. In this paper, based on the rotary inductosyn electromechanical encoder, using electromechanical integration design, casing diameter of 83 mm, the resolution reached 20 bits, conversion accuracy of 10 arcseconds, and through the RS485 bus to communicate with the outside world. The encoder has the characteristics of small volume, reliability and high stability. It can work long term under extremely harsh conditions and is applicable to industrial control system and military applications.
Key words: rotary inductosyn;electromechanical encoder;design of electromechanical integration
 
 
 
    广告服务 |   商务合作 |   使用帮助 |   网站地图 |     主办:中国电器工业协会微电机分会      挂靠:西安微电机研究所有限公司      地址:西安市高新区上林苑四路36号(710117)
   copyright © www.china-micromotor.com.cn all rights reserved.     版权所有:微电机网     陕ICP备05005551号-2
 

西安微电机研究所有限公司公众平台
二维码

《微电机》杂志公众平台二维码