关键字
协会热线:029-84276641
            首页微电机期刊
 
  综述
  伺服与控制
  设计与研究
  专题讲座
  检测技术
  工艺技术
  经验交流
  实用技术
  读者园地
  技术交流
  使用与维护
  标准评述
  工艺与装备
  驱动与控制
  应用研究
  测试研究
  精品连载
 
标题:基于压电驱动的螺纹式直线电机
作者:华顺明,李志强,孟玉明,等
2015年第7期 访问次数:225次

摘要:提出一种基于压电驱动的螺纹式直线电机。电机由弹性体振子、圆筒、精密螺母和螺杆等构成,结构简单紧凑。电机定子由两只兰杰文振子激励,在圆筒内表面形成周向行波,驱动与螺母啮合的精密螺杆转动,从而实现螺杆的轴向直线运动。通过分析螺纹电机的驱动机理,推导定子圆筒表面质点运动轨迹的椭圆方程,建立了定子的有限元模型,并对定子结构进行了模态分析。根据分析结果,设计制作了样机,并搭建了试验装置,对其输出性能进行了测试,验证了所提方案的可行性。
关键词:压电驱动;精密螺旋副;弯曲振动;直线电机
Abstract:A screw type motor based on piezoelectric actuation was proposed, whose rotor was a screw rod. It was compact and composed of elastic vibrators, a hollow cylinder, precise nut, screw rod, and so on. The stator of motor was stimulated by two Langevin vibrators, the precise screw rod matching with nut was driven by the circumferential travelingwave within the inner hollow cylinder, and was forced to move along axial direction. The driving mechanism of screw type motor was preliminarily analyzed, and the elliptic equation of driving point's trajectory on stator hollow cylinder surface was derived. The finite element model of stator was established, and then the modal analysis was performed. The prototype of motor was designed according to the analysis results, and its output performance were tested through corresponding experimental system. The stable driving frequency of prototype is tested as 9.5 KHz, the maximum noload rotational speed and output force are 61 r/min and 21 N separately under Vpp=300 V.
Key words: piezoelectric actuation; precise screw pair; bending vibration; linear motor
 
 
 
    广告服务 |   商务合作 |   使用帮助 |   网站地图 |     主办:中国电器工业协会微电机分会      挂靠:西安微电机研究所有限公司      地址:西安市高新区上林苑四路36号(710117)
   copyright © www.china-micromotor.com.cn all rights reserved.     版权所有:微电机网     陕ICP备05005551号-2
 

西安微电机研究所有限公司公众平台
二维码

《微电机》杂志公众平台二维码