关键字
协会热线:029-84276641
            首页微电机期刊
 
  综述
  伺服与控制
  设计与研究
  专题讲座
  检测技术
  工艺技术
  经验交流
  实用技术
  读者园地
  技术交流
  使用与维护
  标准评述
  工艺与装备
  驱动与控制
  应用研究
  测试研究
  精品连载
 
标题:基于加速度增量控制的无刷直流电机软起动技术研究
作者:薛耀庭,马瑞卿,张震,等
2018年第6期 访问次数:220次

摘要:针对无刷直流电机起动电流冲击的问题,提出了一种基于加速度增量的软起动控制策略,在保证系统响应速度的同时,实现了对起动电流的严格限制,有效地降低了因起动电流冲击导致控制系统逆变器与电机损坏的事件概率。对比传统的转速电流双闭环控制策略,基于加速度增量的无刷直流电机控制系统不依靠电流传感器,仅由转子位置传感器信号计算电机转速,即可实现控制系统的软起动,抑制起动电流的冲击。通过仿真验证可得知,基于加速度增量的无刷直流电机软起动控制策略与传统转速单闭环控制系统和转速电流双闭环控制系统的系统响应性能相当,并且有效地抑制了起动电流冲击。
关键词:无刷直流电机;软起动控制;加速度增量;过流保护
Abstract: Aiming at start current shock of brushless DC motor(BLDCM),this paper proposed a new control strategy based on acceleration increment for soft start of BLDCM, which could limit current critically, and decrease the probability that inverter and motor would damage because of current shock, on the condition that have no influence in response characteristic. Compared with traditional speed and current double closedloop control strategy, no current sensor used in control strategy based on acceleration increment, only reuse signal of rotator position sensor to calculate rotatespeed to finish soft start of control system. It could be got by simulation than control strategy based on acceleration increment has approximately same response characteristic as speed and current double closedloop control strategy and speed closedloop control strategy, also limit start current shock effectively.
Key words: BLDCM; soft start control; acceleration increment; over current protection
 
 
 
    广告服务 |   商务合作 |   使用帮助 |   网站地图 |     主办:中国电器工业协会微电机分会      挂靠:西安微电机研究所有限公司      地址:西安市高新区上林苑四路36号(710117)
   copyright © www.china-micromotor.com.cn all rights reserved.     版权所有:微电机网     陕ICP备05005551号-2
 

西安微电机研究所有限公司公众平台
二维码

《微电机》杂志公众平台二维码