关键字
协会热线:029-84276641
            首页微电机期刊
 
  综述
  伺服与控制
  设计与研究
  专题讲座
  检测技术
  工艺技术
  经验交流
  实用技术
  读者园地
  技术交流
  使用与维护
  标准评述
  工艺与装备
  驱动与控制
  应用研究
  测试研究
  精品连载
 
标题:基于TaguchiBBD方法的PMSM齿槽转矩抑制
作者:贾佳
2019年第4期 访问次数:241次

摘要:针对由永磁同步电机(PMSM)中磁钢与定子铁心之间相互作用而产生的齿槽转矩引起的电机振动与噪声、输出转矩波动、影响控制精度等问题,以一款48槽8极的PMSM为例,提出采用田口方法(Taguchi)与基于Box-Behnken设计的响应面法(BBD)相结合的方式以抑制PMSM的齿槽转矩。为了提高计算效率,首先利用Taguchi对齿槽转矩幅值相关的初选优化变量,即定子铁心槽口宽度、极弧系数、磁钢厚度、偏心距、磁钢充磁方式五个变量,安排了正交试验,并进行了最优目标变量的局部搜索以及对齿槽转矩影响比重较大的初选优化变量进行筛选,得到复选优化变量。其次,利用BBD对复选优化变量安排响应面试验,采用最小二乘法对响应面函数进行拟合回归,并对模型回归结果的有效性和拟合程度进行方差分析,最终利用BBD对最优目标变量进行全局搜索,得到最优解,抑制了PMSM的齿槽转矩幅值。研究结果表明,通过TaguchiBBD的方法,能有效抑制PMSM的齿槽转矩。
关键词:齿槽转矩;Taguchi;BBD;正交试验
Abstract: For cogging torque of permanent magnet synchronous motor caused by interactions between magnet poles the stator iron core, which may cause vibration and noise, the output torque ripple, affecting the control precision and so on, PMSM with 48 slots and 8 poles being as an example, the method combining with Taguchi method and response surface method based on BoxBehnken design was proposed to reduce the cogging torque of PMSM. For improving the efficiency, Taguchi method was used to arrange orthogonal test for the firstchoice optimization variables which includes slit width of the stator core, arc coefficient, magnetic steel eccentricity and thickness, and direction of magnetization. Target variables was local searched and firstchoice optimization variables with greater impact on the cogging torque was screening to get the secondchoice optimization variables. BoxBehnken design was used to arrange the test for the secondchoice optimization variables. Least square method was used to fit the response surface regression and analysis of variance was used to test the validity of the model regression results and the degree of fitting. In the end, BBD was used to global search for the optimal target variable and suppresses the cogging torque amplitude of PMSM. The results showed that, TaguchiBBD method can effectively reduce the cogging torque of PMSM.
Key words: cogging torque; Taguchi method; BoxBehnken design; orthogonal experimental design
 
 
 
    广告服务 |   商务合作 |   使用帮助 |   网站地图 |     主办:中国电器工业协会微电机分会      挂靠:西安微电机研究所有限公司      地址:西安市高新区上林苑四路36号(710117)
   copyright © www.china-micromotor.com.cn all rights reserved.     版权所有:微电机网     陕ICP备05005551号-2
 

西安微电机研究所有限公司公众平台
二维码

《微电机》杂志公众平台二维码