关键字
协会热线:029-84276641
            首页微电机期刊
 
  综述
  伺服与控制
  设计与研究
  专题讲座
  检测技术
  工艺技术
  经验交流
  实用技术
  读者园地
  技术交流
  使用与维护
  标准评述
  工艺与装备
  驱动与控制
  应用研究
  测试研究
  精品连载
 
标题:基于LuGre模型的伺服系统摩擦补偿策略研究
作者:叶超,崔宁豪,马正雷,等
2019年第5期 访问次数:284次

摘要: 利用摩擦力LuGre模型能很好地诠释摩擦力的动静态特性。本研究首先采用遗传算法辨识Stribeck曲线的参数,将其作为LuGre模型的静态参数。其次,采用阶跃响应曲线拟合得到LuGre模型的动态参数。最后,基于已经辨识的LuGre模型构建S函数,对伺服系统做前馈补偿。针对某型号转台伺服系统,所采用辨识方法的辨识精度高、速度快且鲁棒性好;所设计的前馈补偿器能有效改善转台伺服系统的低速性能。
关键词:LuGre摩擦模型;转台伺服系统;遗传算法;前馈补偿
Abstract: The LuGre model can well explain the dynamic and static characteristics of the friction force. In this study, the genetic algorithm(GA) was used to identify the parameters of the Stribeck curve, which was used as the static parameters of the LuGre model. The dynamic parameters of LuGre model were obtained by step response curve fitting. Finally, the S function was constructed based on the identified LuGre model, and feedforward compensation was applied to the servo system.According to the turntable servo system, the identification method was accurate, fast and robust;The designed feedforward compensator can effectively improve the low speed performance of the turntable servo system.
Key words: LuGre friction model; turntable servo system; genetic algorithm; feedforward compensation
 
 
 
    广告服务 |   商务合作 |   使用帮助 |   网站地图 |     主办:中国电器工业协会微电机分会      挂靠:西安微电机研究所有限公司      地址:西安市高新区上林苑四路36号(710117)
   copyright © www.china-micromotor.com.cn all rights reserved.     版权所有:微电机网     陕ICP备05005551号-2
 

西安微电机研究所有限公司公众平台
二维码

《微电机》杂志公众平台二维码