关键字
协会热线:029-84276641
            首页微电机期刊
 
  综述
  伺服与控制
  设计与研究
  专题讲座
  检测技术
  工艺技术
  经验交流
  实用技术
  读者园地
  技术交流
  使用与维护
  标准评述
  工艺与装备
  驱动与控制
  应用研究
  测试研究
  精品连载
 
标题:基于Ansys潜油电机转轴动力学仿真分析
作者:裴学良
2018年第7期 访问次数:254次

摘要:针对潜油电机在采油过程中出现卡顿时,其细长的电机转轴发生许用扭转变形导致转轴断裂失效、整个电机及相关设备造成损失,推导电磁转矩与电机刚度与挠度解析表达式,建立细长转轴刚度-电磁转矩的定量关系曲线,为潜油电机转轴故障原因提供理论依据。研制单元组合式永磁直驱潜油电机,对其细长转轴进行3D有限元扭转变形应力分析。基于转轴扭转形变结果建立长度相同结构不同的电机等效有限元模型,进行机械应力场计算,得出不同结构的电机转轴在不同工况下的受力情况。进行单元电机组合运行仿真,最终通过Ansys仿真分析相应结构的最大转矩范围,对以后电机的整体设计有一定指导意义。
关键词:潜油永磁电机; 转轴扭曲变形; 解析计算; 3D有限元仿真
Abstract: In consideration of the allowable torsion deformation of the thin motor shaft resulting in a shaft failure with submersible motor for screw pump, analytical expression of the allowable torsion deformation and the electromagnetic torque,the quantitative relation curve of stiffness and electromagnetic torque was established, which provided the theory basis for the failure of submersible motor shaft. Unit combination permanent magnet directdrive submersible multisegmentmotor was developed. The tension stress strength of thin shaft was analyzed by 3D finite element simulation. In the end, the 3D rotorskewing equivalent motor model for the mechanical stress field calculation were established to get the calculation, and the stress of shaft with different structure under different working conditions was obtained, which was of great significance to the overall design of the motor.
 
 
 
    广告服务 |   商务合作 |   使用帮助 |   网站地图 |     主办:中国电器工业协会微电机分会      挂靠:西安微电机研究所有限公司      地址:西安市高新区上林苑四路36号(710117)
   copyright © www.china-micromotor.com.cn all rights reserved.     版权所有:微电机网     陕ICP备05005551号-2
 

西安微电机研究所有限公司公众平台
二维码

《微电机》杂志公众平台二维码