关键字
协会热线:029-84276641
            首页微电机期刊
 
  综述
  伺服与控制
  设计与研究
  专题讲座
  检测技术
  工艺技术
  经验交流
  实用技术
  读者园地
  技术交流
  使用与维护
  标准评述
  工艺与装备
  驱动与控制
  应用研究
  测试研究
  精品连载
 
标题:基于1-DISVM的无刷直流电动机故障识别方法
作者:刘志东,石 山,陈硕勋,等
2013年第3期 访问次数:215次

摘  要:提出一种基于改进无监督学习支持向量机(1-DISVM)的无刷直流电动机故障识别方法。通过对无刷直流电动机正常以及驱动电路开关管断路、定子绕组端部断路、Hall传感器断线三种故障状态的仿真模拟,对仿真过程中得到的母线电流采样数据进行FFT频谱分析,作为输入特征向量用于支持向量机分类器的训练和故障识别。将改进无监督学习支持向量机用于无刷直流电动机的故障识别,并与无监督学习支持向量机(1-SVM)的故障识别结果进行比较,结果表明基于改进无监督学习支持向量机的无刷直流电动机故障识别方法具有更高的准确率。
关键词:无刷直流电动机;故障识别;无监督学习支持向量机
Abstract:  This paper put forward a fault recognition method for BLDCM based on improved unsupervised learning support vector machines-1-DISVM. Some simulation experiments were carried out around inverter system′s single switch tube broken, Hall position sensor′s wire broken, stator winding broken. The signals of the sampled bus current during the experiments were analyzed with FFT and then taken as the inputs for the classification algorithm′s training and fault-recognition. By the comparison of the fault-recognition results between 1-DISVM and common unsupervised learning support vector machines-1-SVM, the result shows that 1-DISVM has higher precision in BLDCM′s fault recognition.
Key words:  BLDCM; fault-recognition; unsupervised learning support vector machines
 
 
 
    广告服务 |   商务合作 |   使用帮助 |   网站地图 |     主办:中国电器工业协会微电机分会      挂靠:西安微电机研究所有限公司      地址:西安市高新区上林苑四路36号(710117)
   copyright © www.china-micromotor.com.cn all rights reserved.     版权所有:微电机网     陕ICP备05005551号-2
 

西安微电机研究所有限公司公众平台
二维码

《微电机》杂志公众平台二维码