关键字
协会热线:029-84276641
            首页微电机期刊
 
  综述
  伺服与控制
  设计与研究
  专题讲座
  检测技术
  工艺技术
  经验交流
  实用技术
  读者园地
  技术交流
  使用与维护
  标准评述
  工艺与装备
  驱动与控制
  应用研究
  测试研究
  精品连载
 
标题:四相双凸极发电机的相磁链模型仿真方法研究
作者:宋奇吼,陈志辉,施树荣
2015年第4期 访问次数:264次

摘要:电励磁双凸极发电机的仿真常采用的有限元方法结果精确,但耗时长。简化的电感分段线性化方法则会造成大的仿真误差。本文分析了四相电励磁双凸极电机相绕组互感相比自感可以忽略的特性,利用四相电枢绕组的对称性,得到四相双凸极电机的相磁链模型,进而建立四相双凸极发电机的仿真模型。通过与有限元仿真以及试验结果的对比,验证了本文方法的快速性与准确性。

关键词:双凸极电机;磁链模型;有限元方法

Abstract: Finite element method is usually adopted to simulate a doubly salient machine. However, it is a time-consuming process. The mutual inductances between two phases can be neglected when comparing to the self-inductance. The simulation method based on the phase flux model was proposed in this paper. The flux model of phase A was setup according to different field currents and phase currents. Then the four-phase doubly salient machine can be obtained by the symmetry of the phases. The flux model method was compared to the finite element method and was verified by the experimental results.

Key words: doubly salient machine;flux model;finite element method

 
 
 
    广告服务 |   商务合作 |   使用帮助 |   网站地图 |     主办:中国电器工业协会微电机分会      挂靠:西安微电机研究所有限公司      地址:西安市高新区上林苑四路36号(710117)
   copyright © www.china-micromotor.com.cn all rights reserved.     版权所有:微电机网     陕ICP备05005551号-2
 

西安微电机研究所有限公司公众平台
二维码

《微电机》杂志公众平台二维码