关键字
协会热线:029-84276641
            首页微电机期刊
 
  综述
  伺服与控制
  设计与研究
  专题讲座
  检测技术
  工艺技术
  经验交流
  实用技术
  读者园地
  技术交流
  使用与维护
  标准评述
  工艺与装备
  驱动与控制
  应用研究
  测试研究
  精品连载
 
标题:同步磁阻电机分析与设计(三)
作者:沈建新,蔡顺,郝鹤,等
2016年第11期 访问次数:227次

摘要:从极对数和裂比对交直轴电感的影响出发,分析了同步磁阻电机的凸极率随极对数和裂比的变化趋势。优化设计了3台不同极对数的同步磁阻电机,研究了不同裂比下3台电机的转矩密度、功率因数和效率,同时兼顾电机的绕组端部长度和体积,提出了同步磁阻电机极对数和裂比的基本设计原则。
关键词:同步磁阻电机;极对数;裂比;电感;转矩密度

Abstract: Considering the influence of the number of polepairs and split ratio on the directaxis and quadratureaxis inductances, the relationship between the rotor saliency and the number of polepairs and split ratio for synchronous reluctance machine (SynRM) was analyzed. Three prototypes with different number of polepairs were optimized, their torque density, power factor and efficiency were investigated for different split ratio designs. Besides, the endwinding length and machine volume were considered. Finally, the criteria of the number of polepairs and split ratio selection for the SynRM were concluded.
Key words: synchronous reluctance machine; number of polepairs; split ratio; inductance; torque density

 
 
 
    广告服务 |   商务合作 |   使用帮助 |   网站地图 |     主办:中国电器工业协会微电机分会      挂靠:西安微电机研究所有限公司      地址:西安市高新区上林苑四路36号(710117)
   copyright © www.china-micromotor.com.cn all rights reserved.     版权所有:微电机网     陕ICP备05005551号-2
 

西安微电机研究所有限公司公众平台
二维码

《微电机》杂志公众平台二维码