关键字
协会热线:029-84276641
            首页微电机期刊
 
  综述
  伺服与控制
  设计与研究
  专题讲座
  检测技术
  工艺技术
  经验交流
  实用技术
  读者园地
  技术交流
  使用与维护
  标准评述
  工艺与装备
  驱动与控制
  应用研究
  测试研究
  精品连载
 
标题:分段斜极EPS电机齿槽转矩的研究
作者:张颖博,于大洪,谢英
2018年第3期 访问次数:234次

摘要:文章介绍了目前电动助力转向永磁无刷直流电机降低齿槽转矩的方法,根据分段斜极电机齿槽转矩的计算公式,建立电机转子分段斜极等效2D有限元模型,代替3D模型。计算和分析电机的齿槽转矩,对比了转子分段斜极和直极电机的齿槽转矩,通过试验和仿真的对比,验证方法的可行性。并对电机分块定子结构进行FFT分析,得出电机齿槽转矩离散性大的主要因素。
关键词:EPS电机;齿槽转矩;分段斜极;无刷直流电机
Abstract: This paper concerned the method of reducing the cogging torque in the EPS permanent magnet brushless DC motor. According to the calculation formula of the cogging torque of the stepskewing motor, the finite element model of the equivalent rotor was established to replace 3D model. In this paper the cogging torque of the motor was calculated and analyzed, comparing the cogging torque of the rotor and the straight pole of the rotor. The feasibility of the method was verified by comparing test and simulation. According to the FFT analysis of the block stator motor, the main factor of the disc torque discrepancy was obtained.
Key words: EPS motor; cogging torque; splitskew; brushless DC motor
 
 
 
    广告服务 |   商务合作 |   使用帮助 |   网站地图 |     主办:中国电器工业协会微电机分会      挂靠:西安微电机研究所有限公司      地址:西安市高新区上林苑四路36号(710117)
   copyright © www.china-micromotor.com.cn all rights reserved.     版权所有:微电机网     陕ICP备05005551号-2
 

西安微电机研究所有限公司公众平台
二维码

《微电机》杂志公众平台二维码