关键字
协会热线:029-84276641
            首页微电机期刊
 
  综述
  伺服与控制
  设计与研究
  专题讲座
  检测技术
  工艺技术
  经验交流
  实用技术
  读者园地
  技术交流
  使用与维护
  标准评述
  工艺与装备
  驱动与控制
  应用研究
  测试研究
  精品连载
 
标题:一种永磁直线同步电机滑模控制系统设计
作者:李建国,潘三博,张希
2015年第6期 访问次数:227次

摘要:永磁同步电动机因其高可靠性和功率因数高等优点,广泛应用于各种交流伺服系统中。根据永磁直线同步电机数学模型,提出了永磁直线同步电机一个准线性化的并解耦模型,通过将初级电压作为控制系统输入,并进行反馈线性变换,然后通过固定边界层的滑模控制控制此非线性模型,保证了系统具有良好的鲁棒性,同时能够消除“抖振”。利用Matlab仿真软件建立此系统模型,并与传统PID控制方法进行了系统仿真与实验对比,验证了此方法具有较好的性能。
关键词:永磁直线同步电机;非线性控制; 滑模控制
Abstract: Permanent magnet synchronous motor (PMSM) has widely used in AC servo system for its advantages of high reliability and power factor. According to the mathematical model of permanent magnet linear synchronous motor, using the primary voltage as the input variable of the control system,after feedback linearization and its transformation, a quasilinearization and decoupling model was derived. Then using sliding mode control to control this nonlinear model to ensure the robustness of the system, at the same time it is able to eliminate the buffeting. Then established the model for this system by Matlab software and simulating compared with the traditional PID control method. System simulation and experiments verified the good performance of this method.
Key words: permanent magnet linear synchronous motor; nonlinear control; sliding mode control
 
 
 
    广告服务 |   商务合作 |   使用帮助 |   网站地图 |     主办:中国电器工业协会微电机分会      挂靠:西安微电机研究所有限公司      地址:西安市高新区上林苑四路36号(710117)
   copyright © www.china-micromotor.com.cn all rights reserved.     版权所有:微电机网     陕ICP备05005551号-2
 

西安微电机研究所有限公司公众平台
二维码

《微电机》杂志公众平台二维码