关键字
协会热线:029-84276641
            首页微电机期刊
 
  综述
  伺服与控制
  设计与研究
  专题讲座
  检测技术
  工艺技术
  经验交流
  实用技术
  读者园地
  技术交流
  使用与维护
  标准评述
  工艺与装备
  驱动与控制
  应用研究
  测试研究
  精品连载
 
标题:一种有限转角力矩电机的设计方法
作者:刘华源,王自强,杨 帆
2013年第1期 访问次数:233次

摘  要:研究用于扫描驱动系统的一种永磁有限转角力矩电机的设计方法。以经典磁路计算方法,推导出反电势、电磁转矩、电枢电感等电机参数的计算公式。研究结果表明在电机工作角度范围内反电势为平顶波,并与电机转速成正比,以及平均力矩与电流成正比,并得出电机物理尺寸、材料性质与以上各参数的相关性。用Maxwell2D软件进行有限元建模仿真分析,验证设计计算公式的正确性。该有限转角力矩电机功率密度较高,体积小,可靠性高;并且工作特性接近直流电机,控制方式简单。
关键词:永磁材料;有限转角;力矩电机;设计方法;有限元分析
Abstract:  In order to apply to scan drive system,a permanent magnet(PM) limited angle torque motor and its design method was studied.Through the classic magnet circuit calculation,the motor′s parameter formulas were deduced,which included the back electromotive force(back-EMF), electromagnetic torque and armature inductance.These formulas reveals the electromagnetic torque′s proportional correlation with winding current,the back-EMF′s flat-topped feature and its proportional correlation with rotation speed.And the formulas also shows the affect of physical dimensions and material properties to the above-mentioned parameters. By using the maxwell2D software′s finite element model,simulation analysis verified the formulas′ validity.The motor with this structure has high power density, high reliability and smaller size.And its operating characteristics are similar to direct curren(DC) motor which lead to simple control strategy.
Key words:  permanent magnet; limited angle; torque motor; design method; finite element analysis
 
 
 
    广告服务 |   商务合作 |   使用帮助 |   网站地图 |     主办:中国电器工业协会微电机分会      挂靠:西安微电机研究所有限公司      地址:西安市高新区上林苑四路36号(710117)
   copyright © www.china-micromotor.com.cn all rights reserved.     版权所有:微电机网     陕ICP备05005551号-2
 

西安微电机研究所有限公司公众平台
二维码

《微电机》杂志公众平台二维码