关键字
协会热线:029-84276641
            首页—微电机期刊
 
  综述
  伺服与控制
  设计与研究
  专题讲座
  检测技术
  工艺技术
  经验交流
  实用技术
  读者园地
  技术交流
  使用与维护
  标准评述
  工艺与装备
  驱动与控制
  应用研究
  测试研究
  精品连载
 
标题:考虑死区补偿的永磁同步电机在线参数辨识范
作者:惊京,刘莹,程善美
2018年第8期 访问次数:929次

摘要:针对永磁同步电机控制过程中参数失配问题,深入分析了永磁同步电机的数学模型,设计了基于模型参考自适应系统(MRAS)的参数在线辨识方法。为避免辨识过程中逆变器死区效应的影响,提出一种基于电压模型线性补偿的死区补偿方法,通过分析逆变器插入死区后的电压模型计算出死区压降,将死区压降补偿到MRAS参考模型及自适应律中以提高辨识算法的稳定性和准确性。通过仿真证明了参数在线辨识方法和死区补偿方法的有效性。
关键词:永磁同步电机;模型参考自适应;参数辨识;死区补偿
Abstract: This paper analyzed the mathematical model of permanent magnet synchronous motor aiming at parameters mismatching in control of PMSM. Firstly, an online parameter identification method based on model reference adaptive system (MRAS) was proposed. Secondly, a linear deadtime compensation method based on voltage model of PMSM was proposed, the voltage drop caused by the dead time was calculated by analyzing the voltage model after the deadtime effect was considered, and the deadtime voltage drop was compensated to the MRAS reference model and the adaptive law to improve the stability and accuracy of the identification algorithm. The simulation result proves the validity of online parameter identification and deadtime compensation.
Key words: permanent magnet synchronous motor; model reference adaptive system; parameter identification; deadtime compensation
 
 
 
    广告服务 |   商务合作 |   使用帮助 |   网站地图 |     主办:中国电器工业协会微电机分会      挂靠:西安微电机研究所有限公司      地址:西安市高新区上林苑四路36号(710117)
   copyright © www.china-micromotor.com.cn all rights reserved.     版权所有:微电机网     陕ICP备05005551号-2
 

西安微电机研究所有限公司公众平台
二维码

《微电机》杂志公众平台二维码