关键字
协会热线:029-84276641
            首页—微电机期刊
 
  综述
  伺服与控制
  设计与研究
  专题讲座
  检测技术
  工艺技术
  经验交流
  实用技术
  读者园地
  技术交流
  使用与维护
  标准评述
  工艺与装备
  驱动与控制
  应用研究
  测试研究
  精品连载
 
标题:双三相异步电机缺两相故障容错运行控制
作者:时薇薇,陆海峰,柴建云,等
2017年第1期 访问次数:942次

摘要:双三相异步电机具有较多的控制自由度。当电机绕组发生缺相故障时,可以通过容错控制维持电机继续运行,使电驱动系统获得更高的运行可靠性。本文针双三相电机中性点的两种连接方式分别推导了两相故障后的解耦变换矩阵,建立了缺相故障后电机的数学模型。根据故障后电机的控制自由度和降载系数,计算了不同运行模式下的容错运行电流。通过引入比例谐振控制器(Proportional Resonant, PR)实现了缺相下各相电流的容错控制。实验结果表明所提容错运行控制方法能够抑制缺相故障后电机的转速波动,而且不同容错运行模式均具有各自的优化效果。
关键词:双三相异步电机;不对称故障;容错控制;PR控制器
Abstract: The dual threephase machine has more controllable freedoms. When the windings of the machine malfunction, it can maintain operation by proper control method, which increases the reliability of the whole system. This paper deduced the decomposition transformations and built the vector space decomposition models (VSD model) for the faulted machine with single and two isolated neutral points. According the controllable freedoms and derating factors, the fault tolerance currents of different running modes were calculated. The fault tolerance control was implemented by the proportion resonance controller (PR Controller) for every phase. Experiment results indicate that the fault tolerance control can suppress the pulsating speed and give the optimization performances according different optimize objects.
Key words: dual threephase induction machine;unbalance fault;fault tolerance control;PR controller
 
 
 
    广告服务 |   商务合作 |   使用帮助 |   网站地图 |     主办:中国电器工业协会微电机分会      挂靠:西安微电机研究所有限公司      地址:西安市高新区上林苑四路36号(710117)
   copyright © www.china-micromotor.com.cn all rights reserved.     版权所有:微电机网     陕ICP备05005551号-2
 

西安微电机研究所有限公司公众平台
二维码

《微电机》杂志公众平台二维码